Whirlpool dishwasher error code list
12 Whirlpool dishwasher error codes, each checked against Whirlpool's official support pages, with what the code means. Pick a code in the table for step-by-step fixes, or type it in the box below.
The most common Whirlpool dishwasher codes on this list are about power, motor or control fault (4), sensor fault (2) and heating problem (2). If the display shows a code that is not listed, check the model number on the sticker inside the door and send it to us.
| Code | Meaning | Also shown as |
|---|---|---|
F1E1 | Control module fault | F1 E1, F1-E1, 1 flash, pause, 1 flash, E1 F1 |
F2E1 | Stuck key or console error | F2 E1, F2-E1, 2 flashes, pause, 1 flash |
F2E2 | Control communication error | F2 E2, F2-E2, 2 flashes, pause, 2 flashes |
F4E3 | Heating error | F4 E3, F4-E3, 4 flashes, pause, 3 flashes |
F6E1 | User interface error | F6 E1, F6-E1, 6 flashes, pause, 1 flash |
F6E3 | Too many suds detected | F6 E3, F6-E3, 6 flashes, pause, 3 flashes |
F6E4 | Water float switch error | F6 E4, F6-E4, 6 flashes, pause, 4 flashes |
F7E2 | Wash motor error | F7 E2, F7-E2, 7 flashes, pause, 2 flashes |
F8E4 | Water in drip tray | F8 E4, F8-E4, 8 flashes, pause, 4 flashes, E4 F8 |
F9E1 | Long drain, not draining | F9 E1, F9-E1, 9 flashes, pause, 1 flash, E1 F9 |
H20 | Not detecting water | H2O |
Sanitize light flashing | Sanitize temperature not reached | Sanitized light blinking |
Other Whirlpool appliances: Washer codes · Dryer codes