F6 E3

Whirlpool dishwasher error code F6 E3: too many suds detected

Also shown as 6 flashes, pause, 3 flashes on some Whirlpool models.

Whirlpool dishwasher code F6 E3 (often typed F6E3) means the dishwasher sensed foam in the tub. When it detects suds, it may not fill with water or run properly. Whirlpool's sister brands Maytag, KitchenAid and Amana use the same code and the same help page, which lists too many suds as the cause. The usual fix is to remove the foam, calm what is left with a little vegetable oil, and run an empty cycle.

Quick answer: start with remove the foam. It takes 10 min and fixes the most common cause.

Signs you'll notice

What causes F6 E3, most likely first

How to fix Whirlpool F6 E3: free fixes first

Safety: unplug the dishwasher before opening any panel.

1Remove the foam

10 min, easy. You'll need: a plastic cup, towels

  1. Cancel the cycle and let the dishwasher drain if it will.
  2. Open the door and take out the dishes.
  3. Scoop the suds out of the bottom of the tub with a plastic cup and wipe up any spills.

Tip: Do not run the dishwasher again while there is foam in the tub.

Did this fix it?

2Calm the remaining suds with vegetable oil

5 min, easy

  1. With the tub empty, pour 2 to 3 tablespoons of vegetable cooking oil into the bottom.
  2. Close the door.
  3. Run a full cycle with no dishes and no detergent.

Tip: This is the step Amana's help page gives for F6E3. Whirlpool brands share the same code.

Did this fix it?

3Rinse the tub with a normal empty cycle

1 hour, easy

  1. Run one more empty cycle with the correct amount of dishwasher detergent.
  2. Check the tub for any foam when it finishes.
Did this fix it?

4Use the right soap from now on

2 min, easy

  1. Use only detergent made for dishwashers, never hand dish soap.
  2. Follow the amount on the detergent package.
  3. Do not load dishes that still have soap on them.
Did this fix it?

Still showing F6 E3?

If F6 E3 keeps coming back after you use the right soap in the right amount, check the rinse aid dispenser for a leak. A technician can inspect it. Check your model's manual for the exact steps.

Find the part for your model

Match the part to the model number on the sticker inside the door or on the back.

How much does it cost to fix?

Do it yourself
$0 to a few dollars for oil and detergent
Replacement part
Rinse aid dispenser: varies by model
Repair technician
Ask for a quote before the visit

Indicative only. Costs vary by model and region.

Questions people ask about Whirlpool F6 E3

What does F6 E3 mean on a Whirlpool dishwasher?

The dishwasher detected too many suds in the tub. It is a foam warning, not usually a broken part.

Is F6E3 the same as F6 E3?

Yes. Some displays show the two parts separately. Models without a display flash the lights 6 times, then 3 times.

How do I get rid of suds in a dishwasher?

Scoop out the foam, add 2 to 3 tablespoons of vegetable cooking oil to the empty tub, and run a full cycle with no dishes and no detergent.

Can I use dish soap in the dishwasher?

No. Hand dish soap makes far too much foam. Use only detergent made for dishwashers.

Does Maytag or KitchenAid use the same F6E3 code?

Yes. Maytag, KitchenAid and Amana publish the same F6E3 help page as Whirlpool.

Related dishwasher codes

Full guide: Dishwasher other messages · All Whirlpool dishwasher codes

Sources: Whirlpool Product Help: F6E3 dishwasher, Amana Product Help: F6E3 dishwasher. Reviewed 2026-10-07. WhatsMyErrorCode is not affiliated with Whirlpool.