Whirlpool dryer error code list
11 Whirlpool dryer error codes, each checked against Whirlpool's official support pages, with what the code means. Pick a code in the table for step-by-step fixes, or type it in the box below.
The most common Whirlpool dryer codes on this list are about power, motor or control fault (5), sensor fault (4) and blocked vent or lint filter (1). If the display shows a code that is not listed, check the model number on the sticker inside the door and send it to us.
| Code | Meaning | Also shown as |
|---|---|---|
AF | Restricted airflow | Check Vent, F4E3, F4 E3 |
F1 E1 | Control fault, reset needed | F1E1 |
F1E3 | Control unit or wiring issue | F1 E3 |
F3 E1 | Exhaust thermistor problem | F3E1 |
F3 E2 | Moisture sensor not reading | F3E2 |
F3 E3 | Inlet thermistor problem | F3E3 |
F4 E1 | Heater or heater relay problem | F4E1 |
F6 E2 | Control fault, reset needed | F6E2 |
F7 E1 | Motor, control or wiring problem | F7E1 |
L2 | Low or no line voltage | |
PF | Power failure interrupted cycle | Power failure |
Other Whirlpool appliances: Washer codes · Dishwasher codes