Whirlpool dishwasher error code
F9E1 Long drain, not draining
The dishwasher took too long to drain or could not drain at all.
Also shown on some Whirlpool models as: F9 E1 F9-E1 9 flashes, pause, 1 flash E1 F9
Try these free fixes first
Unplug the dishwasher before opening any panel.
- Take out the filter at the bottom of the tub and rinse it under running water.
- Look along the drain hose for kinks, pinches or clogs.
- If it drains into a garbage disposer, run the disposer and make sure the knockout plug was removed on a new install.
- Clean the sink air gap if you have one.
- Unplug or switch off the breaker for 30 seconds, then restore power and try again.
Still showing F9E1?
If water still will not drain, a technician should check the drain pump and its wiring.
Questions people ask
What does F9E1 mean on a Whirlpool dishwasher?
F9E1 on a Whirlpool dishwasher means: long drain, not draining. The dishwasher took too long to drain or could not drain at all.
How do I fix Whirlpool dishwasher error F9E1?
Take out the filter at the bottom of the tub and rinse it under running water. Look along the drain hose for kinks, pinches or clogs. If it drains into a garbage disposer, run the disposer and make sure the knockout plug was removed on a new install. Clean the sink air gap if you have one. Unplug or switch off the breaker for 30 seconds, then restore power and try again.
When should I call a repair technician?
If water still will not drain, a technician should check the drain pump and its wiring.
Related dishwasher codes
Samsung 1EDishwasher: Clogged filter (or overheating on some models)Samsung 5CDishwasher: Dishwasher will not drainSamsung OCDishwasher: Too much water insideLG OEDishwasher: Dishwasher not drainingBosch E24Dishwasher: Not draining, drain blockedBosch E25Dishwasher: Drain pump blocked or cover looseSource: Whirlpool official support · Reviewed 2026-10-01