Samsung dishwasher error code 1E: clogged filter (or overheating on some models)
Also shown as IE on some Samsung models.
Samsung dishwasher error code 1E (also displayed as IE) doesn't mean the same thing on every model, and that's the most important thing to know. According to Samsung, on Waterwall models 1E means a clogged filter: water isn't flowing through the filter at the bottom of the tub. On models with a rotary dial, 1E belongs to the same family as HC: the inside of the dishwasher is too hot. Start by cleaning the filter, which takes 10 minutes, then restart the dishwasher.
Quick answer: start with clean the filter. It takes 10 min and fixes the most common cause.
Signs you'll notice
- Dishes come out dirty or gritty.
- Standing water or food debris at the bottom of the tub.
- On rotary-dial models: the code appears during the hot part of the cycle.
What causes 1E, most likely first
- Most commonClogged filter (Waterwall models)
Food scraps, seeds and grease block the filter at the bottom of the tub.
- CommonOverheating (rotary-dial models)
Samsung groups 1E/IE with HC on these models: the temperature inside is too high.
- Less commonDebris in the sump
Bits that got past the filter and sit under it.
- RareSensor or control fault
If the code returns after cleaning and a restart.
How to fix Samsung 1E: free fixes first
Safety: unplug the dishwasher before opening any panel.
1Clean the filter
- Turn the dishwasher off and pull out the lower rack.
- Twist the cylindrical filter at the bottom of the tub counter-clockwise and lift it out, along with the flat mesh filter under it.
- Rinse both under warm water and scrub with a soft brush. Don't use a wire brush.
- Remove any debris you can see in the opening below.
- Refit the flat filter, then lock the cylinder back in by turning it clockwise.
Tip: Scrape plates before loading and clean the filter once a month, and 1E rarely comes back.
2Restart the dishwasher
- Switch the breaker off for 1 minute, then back on.
- Run a short cycle with an empty dishwasher.
3If you have a rotary-dial model
- Let the dishwasher cool with the door open.
- Restart it. If the code comes back during heating, the heater or temperature sensor needs checking by a technician.
Still showing 1E?
If the filter is clean and 1E returns, there may be a blockage further down, a pump issue, or on rotary models a heater or temperature sensor fault. These need a technician.
Find the part for your modelMatch the part to the model number on the sticker inside the door or on the back.
How much does it cost to fix?
- Do it yourself
- $0
- Replacement part
- Filter set: about $15 to $40
- Repair technician
- About $120 to $250 with labour
Indicative ranges, they vary by model and region.
Questions people ask about Samsung 1E
Is 1E the same as IE on a Samsung dishwasher?
Yes. Samsung lists them together; it depends on how your display shows the characters.
Why does 1E mean different things on different Samsung dishwashers?
Samsung uses it for a clogged filter on Waterwall models and for overheating on rotary-dial models. Check which type you have.
How often should I clean a Samsung dishwasher filter?
About once a month, more often if you don't scrape plates before loading.
1E came back after I cleaned the filter. What now?
Restart the dishwasher. If it keeps coming back, have a technician check the pump and sensors.
Related dishwasher codes
LG OEDishwasher: Dishwasher not drainingBosch E24Dishwasher: Not draining, drain blockedBosch E25Dishwasher: Drain pump blocked or cover looseBosch E22Dishwasher: Filter blockedBosch E23Dishwasher: Drain pump faulty or cloggedWhirlpool F9E1Dishwasher: Long drain, not drainingFull guide: Dishwasher drain and filter problems · All Samsung dishwasher codes
Sources: Samsung Canada: dishwasher error codes. Reviewed 2026-10-07. WhatsMyErrorCode is not affiliated with Samsung.