Power, motor or control fault
Step by step guide: How to reset a Samsung washer
44 error codes from 8 brands point to this problem: 3 on washers, 16 on dishwashers, 21 on dryers and 4 on combos. Find your brand and code in the tables below, then try the free fixes on the code page first. Always unplug the appliance before opening any panel.
Washer
| Brand | Code | Meaning |
|---|---|---|
| Maytag | F7 E1 | Control problem, try reset |
| Electrolux | E50 | Motor fault |
| Electrolux | EH0 | Power supply problem |
Dishwasher
| Brand | Code | Meaning |
|---|---|---|
| Samsung | 3C | Pump failure |
| Samsung | bE | Stuck button |
| LG | LE | Wash motor error |
| LG | nE | Spray arm motor error |
| LG | PF | Power failure detected |
| Bosch | E27 | Low power supply |
| Whirlpool | F1E1 | Control module fault |
| Whirlpool | F2E1 | Stuck key or console error |
| Whirlpool | F6E1 | User interface error |
| Whirlpool | F7E2 | Wash motor error |
| GE | PF | Power failure occurred |
| Maytag | F1 E1 | Control module error |
| Maytag | F6 E1 | User interface error |
| Maytag | F7 E2 | Wash motor error |
| Frigidaire | PF | Power was interrupted |
| Electrolux | i50 | Wash motor or circulation fault |
Dryer
| Brand | Code | Meaning |
|---|---|---|
| Samsung | 9C1 | Abnormal power supply voltage |
| Samsung | bE | Stuck button |
| Samsung | FC | Power frequency error |
| Samsung | 3C | Motor error |
| LG | PS | Incorrect power supply |
| LG | PF | Power failure detected |
| Bosch | E28 | Electronics fault |
| Whirlpool | F1 E1 | Control fault, reset needed |
| Whirlpool | F1E3 | Control unit or wiring issue |
| Whirlpool | F7 E1 | Motor, control or wiring problem |
| Whirlpool | L2 | Low or no line voltage |
| Whirlpool | PF | Power failure interrupted cycle |
| GE | 1 | Personality setting not selected |
| Maytag | F2 E2 | Keypad or control issue |
| Maytag | E1 | System error, reset needed |
| Maytag | PF | Power failure interrupted cycle |
| Electrolux | E50 | Drum overloaded or motor problem |
| Electrolux | E54 | Motor control problem |
| Electrolux | E80 | Cycle selector problem |
| Electrolux | E9E | Electrical noise or damp controls |
| Electrolux | EH0 | Power supply problem |