How to reset a Samsung washer

Short answer: Samsung says there is no true reset button on its washers. The equivalent is a power cycle: unplug the washer or switch off its circuit breaker, wait 1 to 5 minutes, then turn it back on. This clears a frozen display or an error message, but it does not fix the fault that caused the code.

What does a Samsung washer reset fix?

What does a Samsung washer reset fix: the most common causes, how to check each one and who can fix it, from the most likely to the least likely.

CauseHow to checkCost or who fixes it
Frozen display or error messagePower cycle: unplug or switch off the breaker for 1 to 5 minutesFree
Buttons not respondingTurn off the child lock, then unplug for 60 secondsFree
Wi Fi or SmartThings not connectingHold Smart Control (AP), then Temp (OK)Free
Wrong settings or languageFactory reset in the system menu, some models onlyFree
Code like 4C or 5C keeps coming backA reset does not fix it: fix the water or drain causeFree checks first

Power cycle the washer (the Samsung reset)

  1. Press Power to turn the washer off.
  2. Unplug it, or switch off the circuit breaker that feeds it.
  3. Wait 1 to 5 minutes so the control board fully loses power.
  4. Plug it back in or switch the breaker on, then press Power.
  5. Start a short Rinse and Spin cycle to check that the code is gone.

If the buttons do not respond

Check the child lock first: when it is on, the buttons are locked and the washer seems frozen. Samsung's support pages recommend turning off the child lock, then unplugging the washer for 60 seconds and plugging it back in.

Reset the Wi Fi connection (SmartThings models)

On models with Wi Fi, Samsung describes this network reset: hold Smart Control until AP appears (about 3 seconds), then hold the Temp button until OK appears (about 7 seconds). Turn the washer off; the settings refresh the next time you connect it in the SmartThings app.

Factory reset on some models

Some newer Samsung washers have a factory reset in a system or function menu that restores the settings and the language. It is not available on every model: check the user manual for your model number before trying it.

Why the error code comes back

A reset only clears the message. If the washer showed 4C (water not filling) or 5C (not draining), the cause is still there: a closed water tap, a kinked hose or a blocked filter. Samsung also advises against clearing a code again and again, because it erases the history a technician uses to find the fault. Look up your code below and fix the cause first.

Error codes that mean this problem

BrandCodeMeaning
Samsung washer4CNot filling with water
Samsung washer5CNot draining
Samsung washerdCDoor error
Samsung washerUEUnbalanced load
Samsung washerLEWater level or leak error
Samsung washerSudToo many suds

Questions people ask

How do I reset my Samsung washer after a 4C error?

Fix the cause first: open both water taps fully, check that the inlet hoses are not kinked and clean the small filters where the hoses connect. Then power cycle the washer for 1 to 5 minutes.

Is there a reset button on a Samsung washer?

No. Samsung says the closest thing is a power cycle: unplug it or switch off the breaker, wait, then turn it back on.

Does a reset delete my settings?

A power cycle does not. A factory reset, available on some models only, can restore the default settings and language.

More guides

Sources: Samsung US: How to reset your Samsung washing machine, Samsung Canada: How to reset your Samsung washer, Samsung: washing machine buttons will not work, Samsung US: washing machine error codes. Reviewed 2026-10-31. WhatsMyErrorCode is not affiliated with any manufacturer.