Electrolux dryer error code E50: drum overloaded or motor problem
Also shown as E5E E50 error on some Electrolux models.
On an Electrolux tumble dryer, E50 means the drum is overloaded or the motor system has a problem. Electrolux's support article also covers E5E and any code that starts with E5. An overloaded drum can cause a temporary motor overload, so the first fix is to take out some laundry, free anything trapped, and reset the dryer. If E50 comes back every time, the drive motor or its control needs a technician.
Quick answer: start with check the load. It takes 5 min and fixes the most common cause.
Signs you'll notice
- The dryer shows E50, E5E or another code that starts with E5.
- The programme stops right after you start it.
- The drum does not turn, even with a normal load.
- You hear unusual noises from the drive system.
What causes E50, most likely first
- Most commonDrum overloaded
A load above the maximum for the selected programme can cause a temporary motor overload. Electrolux tells you to check this first.
- CommonLaundry trapped in the drum
An item caught at the door or around the drum can stop it from turning freely. Electrolux asks you to make sure nothing is trapped.
- CommonTemporary electronic fault
A power reset clears many one-off E50 codes. Electrolux recommends switching the power off for about one minute.
- Less commonMotor or drive system fault
If E50 appears on every cycle, the drum does not turn with a normal load, or the drive makes unusual noises, Electrolux advises booking an engineer.
How to fix Electrolux E50: free fixes first
Safety: unplug the dryer before opening any panel.
1Check the load
- Open the door and look at how full the drum is.
- Take out some laundry if the load is above the maximum for the programme you chose.
- Close the door and restart the programme.
Tip: Check the maximum load for each programme in your user manual. Bulky items such as duvets fill the drum faster than their weight suggests.
2Free any trapped laundry
- Unplug the dryer before you reach inside.
- Check around the door seal and the inside of the drum for caught items.
- Remove anything trapped, plug the dryer back in and restart.
3Reset the dryer
- Unplug the dryer or switch off its circuit breaker.
- Wait about one minute.
- Restore the power, turn the dryer on and select a programme.
- Check whether E50 has cleared.
4Book a technician if E50 keeps coming back
- Write down the full code shown on the display and your model number.
- Stop using the dryer if the drum does not turn or the drive is noisy.
- Contact Electrolux or an authorised repairer. In-warranty repairs are free according to Electrolux UK.
Still showing E50?
If E50 stays after you have reduced the load, freed trapped laundry and reset the dryer, the motor or the drive system may be at fault. These parts sit inside the cabinet: leave the diagnosis to a technician, and unplug the dryer before any inspection.
Find the part for your modelMatch the part to the model number on the sticker inside the door or on the back.
How much does it cost to fix?
- Do it yourself
- $0
- Replacement part
- Drive motor or motor control: varies by model
- Repair technician
- Ask for a quote before the visit; free under warranty
Indicative only. Costs vary by model and region.
Questions people ask about Electrolux E50
What does E50 mean on an Electrolux dryer?
E50 means the drum is overloaded or there is a problem with the motor system. Electrolux covers E5E and other codes that start with E5 in the same article.
How do I reset an Electrolux dryer showing E50?
Unplug the dryer or switch off its circuit breaker, wait about one minute, restore the power, then turn the dryer on and select a programme.
Can too much laundry cause E50?
Yes. Electrolux says an overloaded drum can cause a temporary motor overload. Take out some laundry and restart the programme.
Is it safe to keep using the dryer with E50?
Not if the drum does not turn with a normal load or the drive makes unusual noises. Stop using it and book a technician.
When should I call a technician for E50?
Call one if E50 returns after you adjust the load and reset the dryer, appears on every cycle, or the programme stops right after it starts.
Related dryer codes
Samsung 9C1Dryer: Abnormal power supply voltageSamsung bEDryer: Stuck buttonSamsung FCDryer: Power frequency errorSamsung 3CDryer: Motor errorLG PSDryer: Incorrect power supplyLG PFDryer: Power failure detectedFull guide: Dryer power or motor fault · All Electrolux dryer codes
Sources: Electrolux Support: tumble dryer displays error message E50. Reviewed 2026-11-11. WhatsMyErrorCode is not affiliated with Electrolux.