Maytag washer error code

F9 E1

Washer draining too slowly

The washer is taking too long to drain, so water is leaving slowly or not at all.

Also shown on some Maytag models as: F9E1 drn

Try these free fixes first

Unplug the washer before opening any panel.

  1. Check the drain hose goes no more than about 4.5 inches into the standpipe, since pushing it deeper can cause siphoning.
  2. Make sure the end of the drain hose sits higher than about 36 inches off the floor.
  3. Straighten any kinks and clear clogs in the drain hose.
  4. Clear any blockage in the standpipe or laundry sink drain, and do not tape the hose into the drain opening.

Still showing F9 E1?

If the hose and house drain are clear and it still drains slowly, a technician should check the drain pump for a blockage or failure.

Drain pumpCheck that the part matches your exact model number (usually on a sticker inside the door or on the back).Find the part
Prefer a pro?Compare quotes from local appliance repair services.Get repair quotes (soon)

Questions people ask

What does F9 E1 mean on a Maytag washer?

F9 E1 on a Maytag washer means: washer draining too slowly. The washer is taking too long to drain, so water is leaving slowly or not at all.

How do I fix Maytag washer error F9 E1?

Check the drain hose goes no more than about 4.5 inches into the standpipe, since pushing it deeper can cause siphoning. Make sure the end of the drain hose sits higher than about 36 inches off the floor. Straighten any kinks and clear clogs in the drain hose. Clear any blockage in the standpipe or laundry sink drain, and do not tape the hose into the drain opening.

When should I call a repair technician?

If the hose and house drain are clear and it still drains slowly, a technician should check the drain pump for a blockage or failure.

Related washer codes

Source: Maytag official support · Reviewed 2026-10-01