OE

LG washer error code OE: not draining

Also shown as 0E E03 E21 on some LG models.

LG washer error code OE means the washer tried to drain but couldn't empty the drum in time (about 10 minutes). It's the code LG owners see most often, and most of the time the fix is free: the drain pump filter behind the small door at the bottom front is clogged with lint, coins or hair ties. If the filter is clean, the drain hose or the house drain is next on the list. Allow about 20 minutes and have towels ready.

Quick answer: start with drain the water and clean the pump filter. It takes 20 min and fixes the most common cause.

Signs you'll notice

What causes OE, most likely first

Front of a front-load washer: the drain pump filter sits behind a small door at the bottom front corner, next to a thin emergency drain hose. Filter cap Emergency drain hose
Where to find the drain pump filter on most front loaders.

How to fix LG OE: free fixes first

Safety: unplug the washer before opening any panel.

1Drain the water and clean the pump filter

20 min, easy. You'll need: towels and a shallow tray

  1. Turn the washer off and unplug it.
  2. Open the small door at the bottom front and put towels and a shallow tray underneath.
  3. Unclip the small drain tube, remove its plug and let the water run out.
  4. When the water stops, turn the filter cap counter-clockwise and pull it out.
  5. Clean the filter and the opening with a soft brush and warm water. Feel inside for anything stuck.
  6. Plug the drain tube, refit the filter firmly and close the door.

Tip: LG recommends cleaning this filter regularly. Once a month is a good habit.

Did this fix it?

2Check the drain hose

10 min, easy

  1. Pull the washer forward and straighten the drain hose.
  2. Make sure the end isn't pushed too far into the standpipe.
  3. Pour a bucket of water into the standpipe to make sure the house drain flows.
Did this fix it?

3Run a Rinse + Spin

10 min, easy

  1. Plug the washer back in and run Rinse + Spin with an empty drum.
  2. If it drains and spins, you're done. If OE comes back, listen to the pump during the drain step.
Did this fix it?

Still showing OE?

A pump that hums but moves no water has a stuck or broken impeller. Complete silence during the drain step points to the pump motor, its wiring, or more rarely the control board. If OE shows up along with a puddle under the machine, find the leak first.

Find the part for your model

Match the part to the model number on the sticker inside the door or on the back.

How much does it cost to fix?

Do it yourself
$0
Replacement part
Drain pump: about $25 to $60
Repair technician
About $150 to $250 with labour

Indicative ranges, they vary by model and region.

Questions people ask about LG OE

What does OE stand for on an LG washer?

It's LG's drain error (often read as "outlet error"): the washer couldn't empty the drum in the allowed time.

Why does OE only happen with large loads?

A partly blocked filter can drain a small load but not the extra water of a full one. Clean the filter.

Can I run my LG washer with OE showing?

No. It stops the cycle until it can drain. Clean the filter, then run Rinse + Spin.

Where is the drain filter on an LG front loader?

Behind the small access door at the bottom front of the washer, next to a thin drain tube.

My LG washer is brand new and shows OE. Why?

On new installs, the drain hose is the usual cause: kinked, pushed too far into the standpipe, or still capped.

Related washer codes

Full guide: Washer won't drain · All LG washer codes

Sources: LG support: OE error code. Reviewed 2026-10-07. WhatsMyErrorCode is not affiliated with LG.