GE dishwasher error code list
12 GE dishwasher error codes, each checked against GE's official support pages, with what the code means. Pick a code in the table for step-by-step fixes, or type it in the box below.
The most common GE dishwasher codes on this list are about won't drain (3), water supply / won't fill (3) and sensor fault (2). If the display shows a code that is not listed, check the model number on the sticker inside the door and send it to us.
| Code | Meaning | Also shown as |
|---|---|---|
C1 | Drain took too long | |
C3 | Dishwasher will not drain | |
C4 | Float switch or sump issue | |
C5 | Pump-out time too short | |
C6 | Incoming water too cold | |
C7 | Water temperature sensor fault | |
C8 | Detergent cup blocked | |
PF | Power failure occurred | |
F56 | Failure to drain | FTD |
LEAK DETECTED | Possible leak detected | |
H2O | Low water detected | |
PrS | Pressure sensor signal error |
Other GE appliances: Washer codes · Dryer codes